Socket & See IRC PRO Insulation and Continuity Tester

£249.00

£298.80

SKU
SOC/IRC PRO
  • Insulation Test (250V, 500V, 1000V)
  • Auto ranging continuity up to 19.99kΩ
  • Buzzer facility for “belling out”
More Information
Warranty 2 years
Price Match No
Select a Free Gift

The IRC PRO is an advanced digital continuity and insulation resistance tester.

Features
Insulation Test (250V, 500V, 1000V)
Auto ranging continuity up to 19.99kΩ
Buzzer facility for “belling out”
Nulls leads up to 5Ω
Hands Free function
Hazardous voltage LED and audible tone
Auto switch off function for battery preservation.
Dual insulated wear indicating test leads
GS38 prods and clips
Measurement category CAT III 500V (CAT IV 300V)

The Socket & See IRC PRO features 1,000V testing, with up to 500 tests from a single set of 4 x AA alkaline batteries. Expect even more tests when testing at 250v or 500V.

Other useful features include a large back lit display and protective rubber over mold, making the IRC PRO a versatile unit suitable for many environments. The unit is also fully protected against accidental connection to the mains, an often easy and expensive mistake.

Socket & See IRC PRO test sequences...

Insulation
Turn the rotary dial to the required test voltage. Push the test button. During the test the LCD will indicate the test voltage being applied. The result will then be shown.

Continuity Null
To ensure greater accuracy when performing continuity tests a lead null should be carried out. This will ensure that test lead resistance is taken into account when testing.

Continuity
Turn the rotary dial to the continuity position. Apply test leads to the resistance to be measured and press the test button. To ensure accurate results, the test leads should be nulled.

Hands Free
Hands free operation is available for Continuity or Insulation functions. Select the function required with the rotary dial. Press the hands free button. HANDSFREE will be displayed. Once the test button is pressed the tester will continue to perform the selected test until the hands free is deselected, the test button is pressed or the unit is powered off.

Buzzer
The buzzer function is used for quick and easy “belling out”. Turn the rotary dial to the buzzer function and apply the test leads to the resistance to be measured.

The Socket & See IRC PRO is fully BS EN 61010 and BS EN 61557 certified.
EMC compliance - BS EN 61326

What's included...
Socket & See IRC PRO
Socket & See IRC Pro Manual
Socket & See mains lead inc 3 x 4mm connectors
Magnetic hanging strap
4 x AA batteries

Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Write Your Own Review
You're reviewing:Socket & See IRC PRO Insulation and Continuity Tester
Your Rating