Megger MFT1741+ with Megger EVCA210-UK Adaptor

£1,195.00

£1,434.00

SKU
NEW_CODE852
  • Complete EV testing solution
  • Specifcally designed for the UK market
  • Megger's most advanced multifunction tester
  • Confidence meter for loop testing on noisy circuits
  • Full single and 3 phase compliant installation testing
More Information
Warranty 2 years
Price Match No

Megger MFT141+ Multifunction Tester with Megger EVCA210-UK Adaptor

The MFT1741+ multifunction tester has been designed for testing single and three phase low voltage domestic, commercial and industrial electrical installations, providing all the tests required to complete the necessary electrical certification. All with an EN61010 Cat IV safety rating too.

The NEW MFT1741+ adds the ability to test electric vehicle charging points, including the all-important 6 mA DC test. Used in conjunction with the EV adaptor, the user can carry out a full range of tests required for the installation of EV charge points.

Built to last and take the strains of everyday testing, the 1741 is robust, featuring a large central back lit screen with test buttons situated either side for accessibility for both right and left handed users. Smooth single click rotary dials and large buttons make for easy operation even when wearing gloves. The unit is also IP54 rated, perfect for dusty environments and for the often unpredictable British weather!

The Megger 1741’s new 3 wire loop impedance test uses a combination of test currents and measurement methods to eliminate RCD impedance uplift.

Overlaying the new non-trip loop impedance measurement is the new “confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance via an expanding and contracting arc.

How does the confidence meter arc work?

Circuits with low / no noise.
The display shows a full width analogue arc, consisting of 51 elements. At the start of the test all elements are displayed. The instrument will then check for any adverse electrical noise. If nothing is found the test sequence will terminate and display a final value. The arc closes to one centre element, indicating the maximum degree of confidence in the result.

Circuits with high noise / distortion.
On detecting noise on the supply the Confidence Meter will continue testing and refining its measurement. This is shown by the noise symbol to the left of the display appearing and the arc closing more slowly, pausing or even opening up again in high noise situations. When the confidence meter has refined its measurement, the arc will finally close to one element and the test will stop. The final displayed result may differ from the original quite significantly.

Extreme noise may cause the loop test measurement to continue for over a minute. In this case the tester will stop automatically and the size of the arc will indicate how good the meter believes the displayed value is.

The 1741 also protects against accidental misuse, giving both visual and audible warnings if the unit detects voltages exist on the circuit. Testing will be inhibited to prevent serious damage. Also, save money on batteries as the 1741 includes rechargeable batteries and charger, with a charge time of less than 4 hours.

Megger EVCA210-UK Electric vehicle charge-point adaptor

The Megger EVCA210-UK is the new adapter designed for the complete function and safety testing of Mode 3 AC Electric Vehicle Charge-points in the UK. The adaptor allows the user to carry out tests using suitable single or multifcuntion test equipment, such as the Megger MFT1741+.

The adaptor has been created so that it can be used to test both single and three phase charge points (with appropriate connectors). Furthermore, the EVCA210-UK allows the user to carry out testing of EV charge points in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. It is important to fully test charging points as part of the installation process and also periodically through the charge points full service life.

How does it work?

By simulating an electric vehicle being connected to the charging point under test, the Megger EVCA210-UK enables the user to carry out a range of tests to check the functioning and safety of the charge point and installation.

For the fastest way to test, the Megger MFT1741+ can be connected using the mains socket on the front of the EVCA210-UK adaptor. Once the adaptor is connected to the EV charging point, the operator can trigger the charging process by selecting the appropriate Proximity Pilot (PP) and Control Pilot (CP) states.

The Megger EVCA210-UK has a manual PE pre-test feature allowing the engineer to test for dangerous voltages on the PE before any other testing is carried out. If this test fails, then a full investigation must be carried out before any further testing is undertaken, as potentially dangerous voltages may be present on the PE. Any faults must be rectified before continuing.

Two further manual test can also be carried out using the Megger EVCA210-UK

  • CP error - simulates an error on the control pilot circuit
  • E Error - where a disconnection of the PE circuit is produced

Megger EVCA210-UK full specification and testing capability

  • Input voltage 250 V (single phase system) / 430 V (three phase system)
  • Push Button for PE Pre-Test
  • Rotary switch providing PP State simulation
  • Rotary Switch providing CP State simulation
  • Push button for CP Error “E” simulation
  • Push button for PE Error (Earth Fault) simulation
  • Measurements on live conductors (L1, L2, L3 and N) and on PE conductor
  • Mains Socket: EVCA210-UK - 13A UK socket
  • CP signal test, two 4 mm ports for connection to an oscilloscope
  • CAT II 300 V
  • IP Rating IP54
  • Type 2 Plug for charging points with panel mounted socket outlet or fixed cable with vehicle connector.
  • Type 1 Plug for charging points with fixed cable and vehicle connector
  • Soft Carry Case

What's included

  • Megger MFT1741 Multifunction Tester
  • Printed quick start guide
  • Full user guide on CD
  • Calibration certificate
  • Switched probe SP5
  • Neck strap - Megger embroidered 
  • Wire lead set with prods and clips
  • Mains plug test lead
  • Battery charger 
  • Large soft pouch with extra storage
  • Megger EVCA210-UK
  • Type 1 Charging Plug
  • Type 2 Charging Plug
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account