Kewtech KT63DL Multifunction 5 in 1 Tester
- Displays PFC/PSC at same time as Loop reading
- 250 / 500 / 1000V insulation test with auto discharge
- Test leads auto-null for continuity mode
- RCD auto test mode for 30mA RCDs
Kewtech KT111 TRMS Multimeter<p>The Kewtech KT111 TRMS Multimeter features clever auto detection of measurement type and range up to 500V.</p> <p>Incredibly easy to use, it’s singe button operation, large 4000 count display and data hold feature make the KT111 a great value multimeter for both professional and DIY applications. True RMS measurement provides more reliable results even on noisy circuits.</p> <p>Other features include resistance measurement and continuity check with audible sound and visual indication. The Kewtech KT111 also complies with IEC61010-1 CAT. III 500V. A protective holster with stand provides protection from everyday bumps and scrapes.</p> <p><strong>Specification</strong></p> <ul> <li>Operating voltage: 2 x 1.5V AAA batteries (supplied)</li> <li>Operating current: 30 mA maximum</li> <li>Standby current: <5 µA</li> <li>AC/DC voltage measurment: 0 to 18MΩ approximately</li> <li>Continuity check: <50Ω buzzer sounds</li> <li>Hold button: press for 1 second</li> <li>Auto power off: 5 minutes approximately</li> <li>Input impedance: 10MΩ</li> <li>Low battery indication: <2.6V approximately</li> <li>Minimum power on voltage: >2.5V approximately</li> <li>Operating temperature and humidity: 0°C - 40°C, <75%RH</li> <li>Storage temperature and humidity: 0°C - 60°C, <80%RH</li> </ul> <p><strong><br />What’s included?</strong> <br />Kewtech KT111 Multimeter <br />Protective Holster <br />Test leads <br />Batteries<br /> Instruction manual <br />Certificate of conformity</p>
Socket & See SOK36 Professional Socket Tester<p><strong>Socket & See SOK36 Professional Socket Tester</strong></p> <p>The Socket & See SOK36 is a Professional Socket/Earth Loop/Polarity/RCD Tester.</p> <p><strong>Features:</strong></p> <ul> <li>Bright LED's out perform fragile old style neons</li> <li>Logical `Green for Go` LED Indication</li> <li>New Circuitry means no tripping RCD's</li> <li>Continuous audible tone gives positive good wiring indication</li> <li>Strong warbling tone gives clear warning of faulty wiring</li> <li>Advanced electronics include a quad comparator to give clear indication even on noisey circuits</li> <li>The first socket tester to show where the acutal fault is - Live, Earth or Neutral</li> <li>New patented `Fault Locate' electronics gives clearest indication yet of 18 wiring fault conditions</li> <li>Built-in self check at start of testing gives confidence in correct operation at all times.</li> <li>The first socket tester to also test true earth loop impendance</li> <li>Easy colour LED read out system gives earth loop result as Good/Check or Urgent Check</li> <li>Full earth loop test</li> <li>Operational check of 30mA RCD's</li> <li>Audible tone indication gives clear indication of good socket or problem socket</li> </ul> <p><strong></strong></p> <p><strong>What's Included?</strong></p> <ul> <li>Socket & See SOK 36</li> </ul>
Socket & See VIP Pro Two Pole Voltage Tester<p><strong>Socket & See VIP Pro</strong> </p> <p>Professional two pole voltage tester. It incorporates a number of features which make using the tester safer and easier to use. VIP Pro has unique twin (side by side) colour coded voltage LED's giving extremely clear and easy to read voltage indication. The probe comply fully to the UK HSE GS38 probe tip requirements ensuring full safety compliance at all times. The new ergonomic design is extremely easy and comfortable to hold and is suitable for use with Gauntlets/PPE equipment if required The durable double insulated ultra flexible cable helps prevents tangles and the generous 1.4m cable length gives the operator greater flexibility in use.</p> <p><strong>Features:</strong></p> <ul> <li>Voltage Ranges: 12-50-110-230-400V AC/DC.</li> <li>Double Insulated Lead 1.4 metres.</li> <li>Separate lamps indicate AC or DC with polarity.</li> <li>Safety resistors in the passive probe end make it safe in single fault, if the probe connecting wire gets trapped.</li> </ul> <p><strong>Specifications:</strong></p> <ul> <li>No batteries required</li> <li>Complies with BS EN 61243-3:2010 and BS EN 61326-1:2010 standards</li> <li>Conforms to UK HSE GS 38 tip standards</li> <li>Conforms to EN 61010 and BS EN 61243-3:2010 standards</li> <li>Built to CAT IV 600V safety standards</li> </ul> <p><strong>What's Included?</strong></p> <ul> <li>Socket & See VIP Pro</li> </ul>
Kewtech KT63DL Multifunction Tester
The Kewtech KT63DL is one of the bestselling entry level 18th edition multifunction testers on the market and is ideal for domestic electricians looking for a very easy to use and affordable tester.
Designed for occasional to moderate use, the Kewtech KT63DL is housed in a robust enclosure and is IP54 rated, even when the leads are not plugged in. It features a single rotary dial from which the user can select test ranges for loop, continuity, insulation and RCD testing. The KT63 also features auto testing of the most commonly found 30mA RCD types, preventing the user having to return to the tester when the RCD trips.
The Kewtech KT63DL features a large back lit display, for easy visibility even in poor lighting, along with a soft carry case for protecting and transporting the unit and its accessories. Essential accessories include the Kewtech KAMP 13A mains lead, ACC063 3 wire distribution board test lead set, batteries and manufacturers end of line calibration certificate, all of which are included with the KT63.
All tests can be carried out using the handsfree function. Simply turn the dial to the test required and push the HANDSFREE button. The test will automatically start once the leads are connected.
A short overview of the Kewtech KT63 and it’s functions can be seen in the video below.
The KT63DL features anti trip technology for full no trip loop testing of RCD of all types (AC & ACS). The Prospective Fault Current (PFC) and Prospective Short Circuit (PSC) results are also record at the same time the loop test is carried out and can be displayed by pressing the PFC-LOOP button.
Auto ranging 200mA. The KT63DL is also protected against accidental connection to live circuits and will alert the user accordingly. The test will be inhibited by the KT63DL until no voltage is present. The test leads auto null for continuity mode to ensure fast and reliable readings. You can also use the KT63DL in conjunction with the PAT ADAPTOR1 (available separately) to carry out dead PAT testing.
With selectable ranges of 250V, 500V and 1000V, the KT63 is suitable for dead and live testing. Simply rotate the dial to the required voltage. Again this unit can be used in conjunction with the PAT ADAPTOR1 for insulation testing of portable appliances.
The Kewtech KT63DL can test AC type 30mA / 100mA / 300mA and 500mA RCD’s, with a handy auto test for 30mA. A ramp test feature is available at ½, x1 and x5. 100mA and 300mA ACS type RCD types can also be tested.
Test4less are an authorised Kewtech distributor and service centre. Kewtech KT63DL calibration can be carried out in our state of the art laboratory here at our premises. Test4less can collect and deliver your instrument for a totally hassle free calibration process.
- Kewtech KT63DL multifunction installation tester
- KAMP 13 mains lead
- ACC063 3 wire distribution board lead set
- Large soft carry case with handle and shoulder strap
- Instruction manual
- End of line calibration certificate