Ideal R153001 NaviTEK NT Copper Network Trouble Shooter

£442.95

£531.54

SKU
NEW_CODE343
  • Advanced wiremap for miswires, split pairs, opens and shorts
  • Distance to opens and shorts (TDR)
  • PoE/PoE+ detection
  • Tone generator for cable tracing
More Information
Warranty 1 year
Price Match No

Ideal R153001 NaviTEK NT Copper Network Trouble Shooter

The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre (Pro only) networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare app.

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:

  • Copper and fibre (Pro only) test interfaces
  • Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
  • Detects services such as ISDN, POTS and PoE
  • Accurate wire mapping including length measurement and distance to fault
  • Rugged, compact design permits use in confined spaces
  • Not susceptible to virus and malware attack

Features

Performs tests for copper cabling and networks, including:
Display network configuration - IPv4 /IPv6 compatible

  • Advanced wiremap for miswires, split pairs, opens and shorts
  • Distance to opens and shorts (TDR)
  • PoE/PoE+ detection
  • Tone generator for cable tracing
  • Ping and Traceroute testing
  • Hub blink for port identification
  • DHCP client
  • Switch detection - 10/100/1000 Mb/s
  • User-exchangeable RJ45 inserts
  • Support for up to 12 wiremap remotes
  • Backlit colour screen

Port & network summary info

  • Press the Autotest button to display summary information and allow for detailed inspection of network parameters.

VLAN detection & operation

  • Automatic detection of VLAN ID’s allows the user to configure NaviTEK NT for operation on a VLAN.

Ethernet utilisation

  • Real time display of broadcast network traffic shown as a percentage of port speed for the previous 60 minutes.

CDP/LLDP/EDP port information

  • Show port information using Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP) and Extreme Discovery Protocol (EDP).

Netscan

  • Display list of IP and MAC addresses of every device connected to the network.

Network Probe

  • View network illustration to verify test results of each network component.

Questions & Answers

Q: Which tester should I use if I require PING test with VLAN?

A: NaviTEK NT Plus or Pro

Q: Why does the NaviTEK NT not always detect my 2 meter long patch cable?

A: NaviTEK NT cable detection range is from 3m and above. Any shorter than 3m will not be detected persistently

Q: What software does NaviTEK NT require to generate PDF reports?

A: No software is required. PDF reports are generated from the tester

Q: Can NaviTEK II Plus & Pro be upgraded to NaviTEK NT Plus & Pro including PDF report generation and wireless report transfer?

A: Yes. By downloading the latest software from www.idealnetworks.net and purchasing the approved Wi-Fi adapter Edimax EW-7811Un. Please note the software upgrade will delete all jobs from the tester

Q: Does NaviTEK NT require a factory calibration?

A: No: the indications of optical power, voltage, length etc. are for troubleshooting only and do not need calibration

Q: Can NaviTEK NT Pro measure fibre attenuation?

A: No: The optical power indication is only for troubleshooting purposes. It is not a calibrated measurement with a calibrated source. Accurate attenuation measurement is not possible. A power meter and light source such as IDEAL’s FiberMASTER would be required

Q: Can I use other vendors’ SFP modules instead of IDEAL Networks?

A: Use of other vendors’ SFPs may be possible but is not guaranteed for correct operation, including optical power indication

Q: Can all Active Remotes be used with NaviTEK NT?

A: Yes. Active remotes No.2~ No.12 (part no. 150050) can be used for advanced wiremapping. However VDVII’s Active Remote CAN NOT be used with NaviTEK NT

Q: Why does NaviTEK NT feature user-exchangeable RJ45 ports?

A: Repetitive use wears the gold plating on all RJ45 contacts and this is accelerated when testing with PoE because of the electrical arcing. In addition the contacts are often bent and damaged when users insert RJ11/12 plugs or RJ45 plugs that are not completely crimped

Q: Are the reports supported by IDEAL Data Centre?

A: Not currently

Q: Why can’t I use a laptop PC instead of a NaviTEK NT?

A: Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:

  • Copper and fibre (Pro only) test interfaces
  • Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
  • Detects services such as ISDN, POTS and PoE
  • Accurate wire mapping including length measurement and distance to fault
  • Rugged, compact design permits use in confined spaces
  • Not susceptible to virus and malware attack

What's Included?

  • 1 x NaviTEK NT Test Unit
  • 1 x Remote Unit No. 1
  • 4 x AA Dry Cell Batteries (non-rechargeable)
  • 2 x Patch Cables - 30cm, Cat. 5e STP
  • 1 x Quick Reference Guide
  • 1 x Carry Case
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Write Your Own Review
You're reviewing:Ideal R153001 NaviTEK NT Copper Network Trouble Shooter
Your Rating