Kane 255 Combustion Analyser
- Ideal for engineers who install/service Oil or Gas boilers.
- Measures: CO, CO2 & Temperature.
- Calculates: O2, CO/CO2 Ratio & Efficiency.
- A truly versatile and cost effective option.
Kewtech JAWS Open Jaw Current And Voltage Tester<p><strong>Kewtech JAWS Open Jaw Current And Voltage Tester</strong></p> <p>The Kewtech JAWS Open Jaw Current and Voltage Tester has both functionality and simplicity in mind. Easily measure up to 200A AC / DC current, as well as up to 750V AC and !000V DC TRMS voltage. The unit can also be used as a two pole tester with one probe retained in the housing.</p> <p>Measurement results are displayed clearly on the back lit LCD display, accompanied by a hold and relative function for convenience. The Kewtech JAWS also automatically selects between AC and DC, making measurement time even faster.</p> <p>The test lead can be wrapped around the jaw when not in use and provide with a holster fro convenient storage and transportation. The JAWS is lightweight at only 250g and rated IEC 61010 CAT IV for current measurement safety.</p> <p><strong>Key features</strong></p> <ul> <li>200A AC / DC current measurement</li> <li>750V AC / 1000V DC TRMS Voltage measurement</li> <li>Automatic AC or DC selection</li> <li>Clear LCD display</li> <li>Resistance measurement with buzzer</li> <li>Hold and relative function</li> <li>Test leads neatly wrap around the jaw and between the test leads inputs for handy storage</li> <li>Easy to use even with electrical PPE equipment</li> <li>Automatic back light</li> <li>IEC 61010 CAT IV for current measurement</li> </ul> <p><strong>What's included</strong></p> <ul> <li>Built in test leads</li> <li>Batteries</li> <li>Printed instruction manual</li> <li>Certificate of Conformity</li> <li>Holster</li> </ul>
The Kane 255 Combustion Analyser measures carbon dioxide (CO2), carbon monoxide (CO) and flue temperature. It also calculates oxygen (O2), CO/CO2, ratio, losses, combustion efficiency (Nett, Gross or Condensing) and excess air.
A useful feature for when a CO Alarm is triggered, is that the Kane 255 Combustion Analyser's CO sensor checks CO levels in ambient air. Reading in ppm or mg/m3, the CO reading can be referenced to the oxygen.
The Kane 255 is supplied with a flue probe with integral temperature sensor and also has a protective rubber cover with integral magnet for hands-free operation.
The large display shows two readings at a time. An optional infrared printer is also available for which all data can be printed on. The printed data can be 'live' data, 'frozen data' or stored data. Twenty sets of tests can be stored. Two lines of sixteen characters can be added to the header of printouts.
The Kane 255 Combustion Analyser is controlled using just four buttons and a rotary dial.
- Function Buttons x 4
- Rotary Switch
- Battery Charging Indicator
- Temp & Pressure Connections
- Flue Gas Inlet
- Water Trap
- Particle Filter
|Flue Gas Measurement|
4,000ppm max for 15 mins
±5% of reading
|Carbon Dioxide*1||0-20%||0.1%||±0.3% volume|
|Efficiency (Net or Gross)*2||0-99.9%||0.1%||±1.0% reading|
|Efficiency High (C)*2||0-119.9%||0.1%||±1.0% reading|
|Excess Air*2||0-250%||0.1%||±0.2% reading|
|CO/CO2 ratio*2||0-0.999||0.0001||±5% reading|
*1 Using dry gases at STP
|Pre-programme fuels||Natural gas, Light Oil, Propane, Butane, LPG, Wood Pellets.|
|Weight||1kg / 2.2lb|
|Handset||200mm / 7.9" x 45mm / 1.8" x 90mm / 3.5"|
|Probe||L300mm / 11.8" x Dia 6mm / 0.25" with 200mm / 7.8" long stainless steel shaft, type K thermocouple and 3m / 6ft long neoprene hose|
|Ambient Operating Range||±0°C to ±40°C / 32-104°F
10% to 90% RH non-condensing
|Storage Capacity||20 sets of test results in volatile memory|
|Battery Life||4AA cells
> 8 hours using Alkaline AA cells
|Charger (optional)||110Vac/220 Vac nominal for NMiH batteries only
12V in vehicle charger for NMiH batteries only