Fluke A3003-FC Wireless 2000 Amp DC Clamp Meter
The Fluke a3003 FC Wireless 2000 A DC Current Clamp Meter is a fully functional current clamp meter that wirelessly relays measurements to other Fluke ConnectT enabled units, listed below:
- Fluke 3000 FC DMM
- Fluke TiX560/520 Infrared Camera
- Fluke Ti200/300/400 Infrared Camera
- PC via optional pc3000 FC Adapter
- Fluke Connect Mobile app
You'll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke ConnectT modules as a system for multiple measurements.
Specifications:
| DC Current Function |
| Range |
1.0A to 999.9 A DC |
| 1000 A to 2000 A DC |
| Resolution |
0.1 A |
| 1:00 AM |
| Accuracy |
2% ± 5 digits |
| 2.5% ± 5 digits |
| |
|
| Specifications |
| LCD w/backlight |
3 ½ digits |
| Log rate/Interval |
1 sec minimum/adjustable by PC or front pannel |
| Battery type |
2 AA |
| NEDA 15 A |
| IEC LR6 |
| Battery life |
120 hours |
| Memory |
Record up to 65,000 readings |
| RF communications |
2.4 GHz ISM Band |
| RF communication range |
Open air, unobstructed: Up to 20 m |
| Obstructed, sheetrock wall: Up to 6.5 m |
| Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m |
| Operating temperature |
-10°C to +50°C |
| Storage temperature |
-40°C to +60°C |
| Temperature coefficient |
Add 0.1 X (specified accuracy) /°C (< 18°C or > 28°C) |
| Operative humidity |
90% at 35°C |
| 75% at 40°C |
| 45% at 50°C |
| Altitude |
Operating 2,000 m |
| Storage 12,000 m |
| EMC |
EN 61326-1:2013 |
| Safety compliance |
IEC 61010-1 |
| 600 V CAT IV / 1000 V CAT III |
| 3rd edition |
| Certifications |
CSA C-US |
| CE |
| FCC: T68-FBLE |
| IC: 6627A-FBLE |
| Ingress Protection (IP) rating |
IP42 |
| Jaw opening |
64 mm |
| Size (HxWxD) |
16.5 mm x 6.35 cm x 3.56 cm (6.5 in x 2.5 in x 1.4 in) |
| Weight |
.65 kg (1.75 lb) |
What's Included
- DC Current Module
- Batteries
- Hanging strap magnet
- Quick start guide
