Megger MIT410/2 Industrial Telecom Insulation Tester

£349.95

£419.94

SKU
AVO/MIT410/2
pricematch
  • Insulation testing through 5 different test voltages
  • Digtital/analogue display
  • Polarisation index
  • Absorption ratio
  • 0.01Ω - 10MΩ continuity
More Information
Warranty 3 years
Price Match Yes
Select a Free Gift

Megger MIT410/2 Industrial Telecom Insulation Tester

The ease of use and functionality of the MIT410/2 allow testing insulation, continuity and frequency to be done hassle-free. With the ergonomic design of the MIT410/2 it is incredibly convenient for any electrician to use and carry in their toolkit, this coupled with the simple adjustable dial that allow changing between tests to be straight forward are what puts the MIT410/2 apart.

The feature set on the MIT410/2 covers all the basic insulation checks an engineer may require. The optional test voltages of insulation are 50V, 100V, 250V, 500V and 1000V, with the range up to 200GΩ. The MIT410/2 can also carry out diagnostic tests that its predecessor (MIT400/2) could not, the tests are the Polarisation Index (PI) and Dielectric Absorption Ratio (DAR), these tests help to track the performance of motors. The continuity range is from 0.01Ω to 10MΩ, there is also an automatic reverse polarity test. 600V AC/DC voltage measurement, with a frequency measurement range of 45-450 Hz.

MIT400/2 MIT410/2 MIT420/2 MIT430/2
Insulation test voltages 250 V, 500 V and 1kV
50 V and 100 V
Variable from 10 V to 1kV
Insulation resistance to 200 GΩ 200 GΩ 200 GΩ 200 GΩ
PI, DAR and timed
Lock on
Continuity 0.01 Ω to 10 MΩ 100 Ω
Auto reverse polarity
Test lead null >10 Ω >10 Ω >10 Ω >10 Ω
Voltage measurement 600V AC/DC
mV AC/DC
Frequency measurement 45 - 450Hz 45 - 450Hz 45 - 450Hz
Capacitance Capacitance 1nF - 10µF
Additional Features PASS/FAIL LIMIT ALARM
Auto power down
Can be powered by AA alkaline or NIMH batteries
Recharger ready
On-board memory
Bluetooth downloading and software
2-wire silicone lead set
Probe incorporating test button
Safety CAT IV 600 V CAT IV 600 V CAT IV 600 V CAT IV 600 V
Dust and weather-proof to IP54
Free calibration Certificate
Warranty upgradeable to 3 years FREE

 

What's Included?

  • Megger MIT410/2
  • Red/Black Silicone Lead Set with Clips
  • Protective Rubber Boot
  • Calibration Certificate
  • Batteries
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Write Your Own Review
You're reviewing:Megger MIT410/2 Industrial Telecom Insulation Tester
Your Rating